Maintaining the proper function of your equipment is essential for the smooth operation of your food service business. At FWEParts, we understand the importance of ensuring your units are in top condition. This guide, “How to Perform Door and Latch Adjustments on FWE Units,” provides step-by-step instructions to help you keep your doors and latches operating perfectly. With clear and concise steps, you’ll be able to address issues such as improper door closure and latch malfunction, ensuring your equipment performs reliably. For any additional assistance or inquiries, our dedicated support team is always available. Contact us at 1-615-805-3270 or service@hatcodirect.com for expert guidance.

Tools Needed

• Driver Drill with #2 Phillips Bit
• Flat Blade Screwdriver
• Level

Steps

Door Adjustment (If the door is not closing properly)

0:21 | Step 1: Locate and remove hinge covers from the door hinges.

0:33 | Step 2: Loosen all screws that mount the hinges to both the door and the unit.

0:43 | Step 3: Carefully adjust the door in and out, and side to side taking note of the door leveling and any gaps.

0:51 | Step 4: With the door in a level position, retighten the screws loosened in Step 2.

0:59 | Step 5: Test the door for proper sealing and closure. Re[peat steps 2 – 4 as needed.

1:05 | Step 6: Once the door seals properly and is level, reinstall the hinge covers and return the unit to service.

Latch Adjustment (if the door is not latching properly)

1:16 | Step 1: Locate the door latch and screw for the J-Hook on the bottom side of the latch. Loosen the screw.

1:27 | Step 2: Carefully adjust the J-Hook in and out, tightening the screw and then testing the closure of the unit.

1:33 | Step 3: Repeat Steps 1 & 2 as needed.

1:40 | Step 4 Once the floor handle properly locks onto the latch, confirm the J-Hook is sufficiently high and in place. Test the door for proper sealing and return the unit to service.

As we conclude this guide on performing door and latch adjustments on FWE units, we hope the instructions have been clear and helpful. At FWEParts, our priority is to ensure your equipment operates flawlessly, supporting the efficiency and success of your food service business. If you require further guidance on these adjustments or have any other questions, our expert team is always here to assist you. Feel free to contact us at 1-615-805-3270 or service@hatcodirect.com for personalized support. We’re dedicated to your success and are just a call or an email away.

The post How to Perform Door and Latch Adjustments on FWE Units appeared first on OEM Parts for Hatco Equipment | Hatco Trade Direct Parts.

In the world of food service, precise temperature control is essential for maintaining food quality and safety. At FWEParts, we understand the need for flexibility and accuracy in your equipment settings. This guide, “How to Change the Temperature Display (°F or °C) on Elan Control Boards,” provides simple, step-by-step instructions to help you switch between Fahrenheit and Celsius displays on your control boards. These Elan Control Boards are featured on Radiant Heat and Top Mount Systems, covering various series including A, BT, HHC, HLC, PST, PTST, TST, and UHST. Our goal is to make this process straightforward so you can adjust your settings to meet your specific needs. For additional support or any questions, our dedicated team is always available. Contact us at 1-615-805-3270 or service@hatcodirect.com for expert assistance.

Parts Covered in this Tutorial

• Z-500-1039
• Z-500-1040
• Z-500-1041
• Z-500-1043

Tools Needed

• None!

Steps

0:00 | Introduction

0:07 | Step 1: Turn the knob to the OFF (0°) position and turn the power switch off (O)

0:14 | Step 2: While pressing the “TEMP RECALL” button, turn the power switch to the on position (I). Press and hold until the desired temperature setting is displayed.

As we conclude this guide on changing the temperature display on Elan Control Boards, we hope you found the instructions straightforward and helpful. At FWEParts, our goal is to ensure your equipment operates according to your specific needs, contributing to the success of your food service operations. If you need further assistance or have any questions, our expert team is here to help. Don’t hesitate to reach out to us at 1-615-805-3270 or service@hatcodirect.com for personalized support. We’re dedicated to your success and are always just a call or an email away.

The post How to Change the Temperature Display (°F or °C) on Elan Control Boards appeared first on OEM Parts for Hatco Equipment | Hatco Trade Direct Parts.

Welcome to our easy-to-follow guide on adjusting the Low Temperature Alarm (LTA) on FWE’s Elan Control Boards. These digital control boards are essential for maintaining precise temperature control in Radiant Heat and Top Mount Systems, covering the A, BT, HHC, HLC, PST, PTST, TST, and UHST series. At FWEParts, we understand how critical it is to ensure your equipment operates within the desired temperature range. This guide will walk you through the straightforward steps needed to set or adjust the Low Temp Alarm, helping you maintain optimal performance. For any additional support or inquiries, our expert team is always available. Contact us at 1-615-805-3270 or service@hatcodirect.com for personalized assistance.

Parts Covered in this Tutorial

• Z-500-1039
• Z-500-1040
• Z-500-1041
• Z-500-1043

Tools Needed

• None!

Steps

0:00 | Introduction

0:08 | Step 1: Rotate the knob to OFF (0°). Press and hold the LOW TEMP ALARM button for 6 seconds. The display will show “LtA” and flash Low Temp Alarm Setting (“OFF” will be displayed if it has not been previously set.)

0:24 | Step 2: Rotate the know to the desired temperature setting for your Low Temp Alarm. Press the LOW TEMP ALARM button to accept the new setting.

0:37 | Step 3: To turn the Low Temp Alarm off, rotate the knob below the minimum temperature setting until the display reads OFF. Press the LOW TEMP ALARM button to accept the new setting.

We hope this guide has made it simple for you to adjust the Low Temperature Alarm on your FWE Elan Control Boards. At FWEParts, we are committed to ensuring your equipment operates flawlessly, meeting your specific temperature requirements. If you need further assistance or have any additional questions, our dedicated support team is here to help. Don’t hesitate to reach out to us at 1-615-805-3270 or service@hatcodirect.com for expert guidance. We’re dedicated to your success and are just a call or an email away.

The post How to Adjust the Low Temp Alarm on Elan Control Boards appeared first on OEM Parts for Hatco Equipment | Hatco Trade Direct Parts.