<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>MTU Series - OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</title>
	<atom:link href="https://www.hatcodirect.com/category/series/mtu-series/feed/" rel="self" type="application/rss+xml" />
	<link>https://www.hatcodirect.com/category/series/mtu-series/</link>
	<description>OEM Parts for Hatco Equipment &#124; Hatco Trade Direct Parts</description>
	<lastBuildDate>Wed, 26 Jun 2024 17:04:34 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	

<image>
	<url>https://www.hatcodirect.com/wp-content/uploads/2025/02/hatco-direct-oem-parts-icon-32x32.jpg</url>
	<title>MTU Series - OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</title>
	<link>https://www.hatcodirect.com/category/series/mtu-series/</link>
	<width>32</width>
	<height>32</height>
</image> 
	<item>
		<title>How to Perform Door and Latch Adjustments on FWE Units</title>
		<link>https://www.hatcodirect.com/how-to-perform-door-and-latch-adjustments-on-fwe-units/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Wed, 26 Jun 2024 17:04:28 +0000</pubDate>
				<category><![CDATA[A Series]]></category>
		<category><![CDATA[A-XL Series]]></category>
		<category><![CDATA[BT Series]]></category>
		<category><![CDATA[E Series]]></category>
		<category><![CDATA[E-XL Series]]></category>
		<category><![CDATA[E-XXL Series]]></category>
		<category><![CDATA[HHC Series]]></category>
		<category><![CDATA[HHS Series]]></category>
		<category><![CDATA[HLC Series]]></category>
		<category><![CDATA[LCH Series]]></category>
		<category><![CDATA[LCH-G2 Series]]></category>
		<category><![CDATA[LCH-LV-G2 Series]]></category>
		<category><![CDATA[LCH-SK-G2 Series]]></category>
		<category><![CDATA[LCHR Series]]></category>
		<category><![CDATA[MTU Series]]></category>
		<category><![CDATA[PHTT Series]]></category>
		<category><![CDATA[PHU Series]]></category>
		<category><![CDATA[PST Series]]></category>
		<category><![CDATA[PTST Series]]></category>
		<category><![CDATA[RH Series]]></category>
		<category><![CDATA[RH-B Series]]></category>
		<category><![CDATA[RH-RB Series]]></category>
		<category><![CDATA[Series]]></category>
		<category><![CDATA[TST Series]]></category>
		<category><![CDATA[TST-SL Series]]></category>
		<category><![CDATA[TST-TB Series]]></category>
		<category><![CDATA[UHST Series]]></category>
		<category><![CDATA[Uncategorized]]></category>
		<guid isPermaLink="false">https://www.hatcodirect.com/?p=23538</guid>

					<description><![CDATA[<p>A Step-by-Step Guide to Fine-Tuning Your FWE Units for Peak Performance Maintaining the proper function of your equipment is essential for the smooth operation of your food service business. At FWEParts, we understand the importance of ensuring your units are in top condition. This guide, &#8220;How to Perform Door and Latch Adjustments on FWE Units,&#8221; [&#8230;]</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-perform-door-and-latch-adjustments-on-fwe-units/">How to Perform Door and Latch Adjustments on FWE Units</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">A Step-by-Step Guide to Fine-Tuning Your FWE Units for Peak Performance</p>



<p class="wp-block-paragraph">Maintaining the proper function of your equipment is essential for the smooth operation of your food service business. At FWEParts, we understand the importance of ensuring your units are in top condition. This guide, &#8220;How to Perform Door and Latch Adjustments on FWE Units,&#8221; provides step-by-step instructions to help you keep your doors and latches operating perfectly. With clear and concise steps, you&#8217;ll be able to address issues such as improper door closure and latch malfunction, ensuring your equipment performs reliably. For any additional assistance or inquiries, our dedicated support team is always available. Contact us at 1-615-805-3270 or <a>service@hatcodirect.com</a> for expert guidance.</p>



<figure class="wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio"><div class="wp-block-embed__wrapper">
<iframe title="FWEParts | How to Perform Door and Latch Adjustments" width="1140" height="641" src="https://www.youtube.com/embed/ad_wMEO4rwk?feature=oembed" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>
</div></figure>



<h2 class="wp-block-heading">Tools Needed</h2>



<ul class="wp-block-list">
<li>Driver Drill with #2 Phillips Bit</li>



<li>Flat Blade Screwdriver</li>



<li>Level</li>
</ul>



<p class="wp-block-paragraph"></p>



<h2 class="wp-block-heading">Steps</h2>



<p class="wp-block-paragraph"><strong>Door Adjustment</strong>  (If the door is not closing properly) </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=21s">0:21</a> | Step 1: Locate and remove hinge covers from the door hinges. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=33s">0:33</a> | Step 2: Loosen all screws that mount the hinges to both the door and the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=43s">0:43</a> | Step 3: Carefully adjust the door in and out, and side to side taking note of the door leveling and any gaps. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=51s">0:51</a> | Step 4: With the door in a level position, retighten the screws loosened in Step 2. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=59s">0:59</a> | Step 5: Test the door for proper sealing and closure. Re[peat steps 2 &#8211; 4 as needed. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=65s">1:05</a> | Step 6: Once the door seals properly and is level, reinstall the hinge covers and return the unit to service. </p>



<p class="wp-block-paragraph"><strong>Latch Adjustment</strong> (if the door is not latching properly) </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=76s">1:16</a> | Step 1: Locate the door latch and screw for the J-Hook on the bottom side of the latch. Loosen the screw. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=87s">1:27</a> | Step 2: Carefully adjust the J-Hook in and out, tightening the screw and then testing the closure of the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=93s">1:33</a> | Step 3: Repeat Steps 1 &amp; 2 as needed. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=100s">1:40</a> | Step 4 Once the floor handle properly locks onto the latch, confirm the J-Hook is sufficiently high and in place. Test the door for proper sealing and return the unit to service.</p>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">As we conclude this guide on performing door and latch adjustments on FWE units, we hope the instructions have been clear and helpful. At FWEParts, our priority is to ensure your equipment operates flawlessly, supporting the efficiency and success of your food service business. If you require further guidance on these adjustments or have any other questions, our expert team is always here to assist you. Feel free to contact us at 1-615-805-3270 or <a>service@hatcodirect.com</a> for personalized support. We&#8217;re dedicated to your success and are just a call or an email away.</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-perform-door-and-latch-adjustments-on-fwe-units/">How to Perform Door and Latch Adjustments on FWE Units</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>How to Replace and Perform General Service on Doors</title>
		<link>https://www.hatcodirect.com/how-to-replace-and-perform-general-service-on-doors/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Wed, 07 Feb 2024 18:23:49 +0000</pubDate>
				<category><![CDATA[A Series]]></category>
		<category><![CDATA[A-XL Series]]></category>
		<category><![CDATA[E Series]]></category>
		<category><![CDATA[E-XL Series]]></category>
		<category><![CDATA[E-XXL Series]]></category>
		<category><![CDATA[HHS Series]]></category>
		<category><![CDATA[LCH Series]]></category>
		<category><![CDATA[LCH-G2 Series]]></category>
		<category><![CDATA[LCH-SK-G2 Series]]></category>
		<category><![CDATA[MTU Series]]></category>
		<category><![CDATA[PHTT Series]]></category>
		<category><![CDATA[PHU Series]]></category>
		<category><![CDATA[RH Series]]></category>
		<category><![CDATA[Series]]></category>
		<category><![CDATA[TST-SL Series]]></category>
		<category><![CDATA[Uncategorized]]></category>
		<guid isPermaLink="false">https://www.hatcodirect.com/?p=22542</guid>

					<description><![CDATA[<p>A helpful step-by-step guide to both performing general maintenance and replacing the doors used on FWE units In the dynamic environment of the food service industry, the functionality of every component, including doors, plays a vital role in operational efficiency and customer satisfaction. Recognizing this, FWEParts is committed to providing easy-to-follow, practical guides for maintaining [&#8230;]</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-replace-and-perform-general-service-on-doors/">How to Replace and Perform General Service on Doors</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">A helpful step-by-step guide to both performing general maintenance and replacing the doors used on FWE units</p>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">In the dynamic environment of the food service industry, the functionality of every component, including doors, plays a vital role in operational efficiency and customer satisfaction. Recognizing this, FWEParts is committed to providing easy-to-follow, practical guides for maintaining and servicing your FWE equipment. In our latest tutorial, we delve into the specifics of how to replace and perform general service to doors on FWE units. This guide is designed to empower you with the knowledge needed to ensure your equipment operates at its best. For any additional assistance or inquiries, our support team is readily available. Reach out to us at 1-615-805-3270 or send an email to <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> for expert advice and guidance.</p>



<figure class="wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio"><div class="wp-block-embed__wrapper">
<iframe title="FWE | How to Replace and Perform General Service to Doors" width="1140" height="641" src="https://www.youtube.com/embed/hTEgCKdHEvc?feature=oembed" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
</div></figure>



<h2 class="wp-block-heading">Ordering Replacement Doors and Replacement Door Parts</h2>



<ul class="wp-block-list">
<li>If you need to order new doors for your FWE unit, please follow <strong><a href="https://www.hatcodirect.com/product-category/tops-doors-metal-parts/page/1/">this</a></strong> link for a comprehensive selection and an easy purchasing process</li>
</ul>



<h2 class="wp-block-heading"><strong>Tools Needed</strong></h2>



<ul class="wp-block-list">
<li>Driver Drill with #2 Phillips Bit</li>



<li>Flathead Screwdriver</li>



<li>Small Screwdriver (Regular or Phillips)</li>



<li>Needle Nose Pliers</li>
</ul>



<p class="wp-block-paragraph"></p>



<h2 class="wp-block-heading">Steps</h2>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=0s">0:00</a> | Introduction</p>



<p class="wp-block-paragraph"> <strong>Door Adjustment</strong></p>



<p class="wp-block-paragraph"> <a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=24s">0:24</a> | Step 1: Locate door hinges and remove the hinge covers </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=39s">0:39</a> | Step 2: Loosen all the screws that mount the hinges to both the door and the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=46s">0:46</a> | Step 3: Carefully adjust the door in and out and side to side, taking note of the door leveling and any gaps. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=55s">0:55</a> | Step 4: Retighten screws loosened in Step 2. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=69s">1:09</a> | Step 5: Test door for proper sealing. Repeat Steps 2 &#8211; 4 as needed. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=76s">1:16</a> | Step 6: Once the floor seals properly and is level, reinstall the hinge covers and return the unit to service. </p>



<p class="wp-block-paragraph"><strong>Door Reversal (Hinging Swap for Standard Doors)</strong> </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=85s">1:25</a> | Step 1: Locate the door hinges and remove the covers in the middle of the hinge. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=102s">1:42</a> | Step 2: Remove screws that mount the hinges to the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=115s">1:55</a> | Step 3: Flip the door 180 degrees and reinstall the unit using the same hardware that was removed previously. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=129s">2:09</a> | Step 4: Test the door for proper sealing, then reinstall the hinge covers and return the unit to service. (The FWE decal can be flipped and moved to the top of the flipped door &#8211; Contact the FWE Service Department if a new decal is required.) </p>



<p class="wp-block-paragraph"><strong>Door Reversal (Hinging Swap for Doors with Spring Kit)</strong></p>



<p class="wp-block-paragraph"> <a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=139s">2:19</a> | Step 1: Locate the door hinges and remove the covers in the middle of the hinge, exposing the spring.</p>



<p class="wp-block-paragraph"> <a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=155s">2:35</a> | Step 2: On top of the spring, locate the keeper pin. Using a small screwdriver, relieve tension from the spring while removing the keeper pin.</p>



<p class="wp-block-paragraph"> <a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=165s">2:45</a> | Step 3: Once the keeper pin is removed, relieve pressure from the spring. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=172s">2:52</a> | Step 4: Using a flat screwdriver, pry the spring out of the holder. This will expose the screws so the door can be removed from the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=182s">3:02</a> | Step 5: Remove the screws that mount the hinges to the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=196s">3:16</a> | Step 6: Flip the door 180 degrees and reinstall it on the unit using the same hardware previously removed. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=208s">3:28</a> | Step 7: Pretension the spring on the hinge using a small screwdriver inserted into the hole where the keeper pin goes. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=216s">3:36</a> | Step 8: Set top door spring tension by turning the collar on the spring 3 holes and inserting the keeper pin so that the tension holds it in place. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=236s">3:56</a> | Step 9: Set the bottom door spring tension by turning the collar on the spring 2 holes and inserting the keeper pin so that the tension holds it in place. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=244s">4:04</a> | Step 10: Once tensions have been set, test doors to make sure they seal properly. Return the unit to service. (The FWE decal can be flipped and moved to the top of the flipped door &#8211; Contact the FWE Service Department if a new decal is required.) </p>



<p class="wp-block-paragraph"><strong>Hinge Replacement (Standard Door)</strong> </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=255s">4:15</a> | Step 1: Locate the door hinges and remove the covers in the middle of the hinge. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=270s">4:30</a> | Step 2: Remove the screws mounting hinges to the unit and carefully set the door aside. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=283s">4:43</a> | Step 3: Remove the screws mounting the hinges to the door. Discard old hinges. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=291s">4:51</a> | Step 4: Using the screws removed in Step 3, install the new hinges onto the door. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=297s">4:57</a> | Step 5: Remount the door using screws removed in Step 2, securing the hinges to the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=307s">5:07</a> | Step 6: Check the door for proper sealing and operationality. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=314s">5:14</a> | Step 7: Reinstall the hinges covers and return the unit to service. </p>



<p class="wp-block-paragraph"><strong>Hinge Replacement (Doors with Spring Kit)</strong> </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=325s">5:25</a> | Step 1: Locate the door hinges and remove the covers in the middle of the hinge, exposing the spring. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=333s">5:33</a> | Step 2: Locate the keeper pin on top of the spring. Using a small screwdriver, relieve tension from the spring while removing the keeper pin.</p>



<p class="wp-block-paragraph"> <a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=345s">5:45</a> | Step 3: Once the keeper pin is removed, relieve pressure from the spring. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=352s">5:52</a> | Step 4: Using a flat screwdriver, pry the spring out of the holder. This will expose the screws so the door can be removed from the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=362s">6:02</a> | Step 5: Remove the screws mounting hinges to the unit and carefully set for aside. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=376s">6:16</a> | Step 6: Remove the screws mounting the hinges to the door. Discard old hinges. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=383s">6:23</a> | Step 7: Using the screws removed in Step 6, install the new hinges onto the door.</p>



<p class="wp-block-paragraph"> <a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=390s">6:30</a> | Step 8: Remount the door using the screws removed in Step 5, securing the hinges to the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=400s">6:40</a> | Step 9: Reinstall the spring removed in Step 4. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=405s">6:45</a> | Step 10: Pretension the spring on the hinge using a small screwdriver inserted into the hole where the keeper pin goes. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=413s">6:53</a> | Step 11: Set the top door spring by turning the collar on the spring 3 holes and inserting the keeper pin so that the tension holds it in place.</p>



<p class="wp-block-paragraph"> <a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=432s">7:12</a> | Step 12: Set the bottom door spring tension by turning the spring 2 holes and inserting the keeper pin so that the tension holds it in place. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=443s">7:23</a> | Step 13: Once tensions have been set, test to make sure they seal properly. Reinstall thing covers and return the unit to service.</p>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">As we conclude this guide on replacing and servicing doors on FWE units, we hope you have found the information both informative and easy to follow. At FWEParts, our goal is to ensure your equipment functions flawlessly, contributing to the smooth operation of your food service business. Remember, our team is always here to support you, whether it&#8217;s for further guidance on maintenance tasks or addressing any other concerns you might have. Don’t hesitate to contact us at 1-615-805-3270 or through email at <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> for personalized assistance. We&#8217;re dedicated to your success and are just a call or an email away.</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-replace-and-perform-general-service-on-doors/">How to Replace and Perform General Service on Doors</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>How to Replace Casters used on FWE Units</title>
		<link>https://www.hatcodirect.com/how-to-replace-casters-used-on-fwe-units/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Wed, 07 Feb 2024 17:36:29 +0000</pubDate>
				<category><![CDATA[A Series]]></category>
		<category><![CDATA[A-XL Series]]></category>
		<category><![CDATA[E Series]]></category>
		<category><![CDATA[E-XL Series]]></category>
		<category><![CDATA[E-XXL Series]]></category>
		<category><![CDATA[HHS Series]]></category>
		<category><![CDATA[LCH Series]]></category>
		<category><![CDATA[LCH-G2 Series]]></category>
		<category><![CDATA[LCH-SK-G2 Series]]></category>
		<category><![CDATA[MTU Series]]></category>
		<category><![CDATA[PHTT Series]]></category>
		<category><![CDATA[PHU Series]]></category>
		<category><![CDATA[RH Series]]></category>
		<category><![CDATA[Series]]></category>
		<category><![CDATA[TST-SL Series]]></category>
		<category><![CDATA[Uncategorized]]></category>
		<guid isPermaLink="false">https://www.hatcodirect.com/?p=22544</guid>

					<description><![CDATA[<p>A step-by-step guide to easily replace the casters on your FWE unit In the bustling world of the food service industry, the mobility and stability of your equipment is essential for efficient operation and service excellence. At FWEParts, we are dedicated to ensuring that every aspect of your FWE equipment functions optimally. This includes providing [&#8230;]</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-replace-casters-used-on-fwe-units/">How to Replace Casters used on FWE Units</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph"><strong>A step-by-step guide to easily replace the casters on your FWE unit</strong></p>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">In the bustling world of the food service industry, the mobility and stability of your equipment is essential for efficient operation and service excellence. At FWEParts, we are dedicated to ensuring that every aspect of your FWE equipment functions optimally. This includes providing detailed, user-friendly guides for essential maintenance tasks. Our latest tutorial focuses on how to replace casters on FWE units, a key step in maintaining the maneuverability and safety of your equipment. With this guide, you&#8217;ll be equipped with the knowledge to perform this task swiftly and effectively. For any questions or further assistance, our expert team is always on standby. Feel free to contact us at 1-615-805-3270 or email us at <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> for any help you may need.</p>



<figure class="wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio"><div class="wp-block-embed__wrapper">
<iframe title="FWE | How to Replace Casters" width="1140" height="641" src="https://www.youtube.com/embed/FzOrEXqvJZs?feature=oembed" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
</div></figure>



<h2 class="wp-block-heading">Ordering Replacement Casters</h2>



<p class="wp-block-paragraph">If you are in need of new casters for your FWE unit, you can easily find and purchase them by visiting <a href="https://www.hatcodirect.com/product-category/casters-legs-and-hardware/casters/page/1/"><strong>this link</strong></a>. Our selection ensures you get the right match for your equipment, guaranteeing quality and compatibility.</p>



<h2 class="wp-block-heading">Tools Needed</h2>



<ul class="wp-block-list">
<li>Socket Wrench with 1/2&#8243; Socket</li>



<li>Socket Extender</li>
</ul>



<h2 class="wp-block-heading">Steps</h2>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=0s">0:00</a> | Introduction </p>



<p class="wp-block-paragraph"><strong>Replacing Casters (Non Refrigeration)</strong> </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=24s">0:24</a> | Step 1: Remove all racks, tray slides, and/or shelving inside the unit. Place the unit onto its back, using a buffer such as cardboard or styrofoam to prevent scratches to the outside of the unit.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=35s">0:35</a> | Step 2: Using a socket wrench, remove the four nuts and washers mounting the caster to the unit. Remove and discard the caster. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=51s">0:51</a> | Step 3: Install new caster, making sure studs line up with the caster plate. Use nuts and washers removed in Step 2 to mount in place. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=76s">1:16</a> | Step 4: Place the unit upright and test for functionality. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=85s">1:25</a> | Step 5: Reinstall all racks, tray slides, and/or shelving inside the unit. Return to service. </p>



<p class="wp-block-paragraph"><strong>Replacing Casters (Refrigeration)</strong> </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=90s">1:30</a> | Step 1: Remove all racks, tray slides, and/or shelving inside the unit. Using a lift, raise the unit in the air for clearance tall enough for tools underneath the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=121s">2:01</a> | Step 2: Using a socket wrench, remove the four nuts and washers mounting the caster to the unit. Remove and discard the caster. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=137s">2:17</a> | Step 3: Install new caster, making sure studs line up with the caster plate. Use nuts and washers removed in Step 2 to mount in place. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=157s">2:37</a> | Step 4: Set the unit back down and remove off the lift. Test for operationality. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=165s">2:45</a> | Step 5: Reinstall all racks, tray slides, and/or shelving inside the unit. Return to service.</p>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">As we wrap up this guide on replacing casters for FWE units, we trust that you have found the instructions clear and helpful. Our commitment at FWEParts is to provide you with the resources and support you need to keep your equipment running smoothly and efficiently. Remember, our team is here to assist you with any additional questions or guidance you may require in maintaining your FWE equipment. Please don’t hesitate to reach out to us at 1-615-805-3270 or via email at <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> for personalized support. Your success in the food service industry is our priority, and we are always ready to help ensure your equipment performs at its best.</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-replace-casters-used-on-fwe-units/">How to Replace Casters used on FWE Units</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>How to Install a Retrofit Relay Kit (Z-500-1056) in FWE MTU Series Cabinets</title>
		<link>https://www.hatcodirect.com/how-to-install-a-retrofit-relay-kit-z-500-1056-in-fwe-mtu-series-cabinets/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Tue, 26 Sep 2023 16:50:55 +0000</pubDate>
				<category><![CDATA[MTU Series]]></category>
		<category><![CDATA[Service & Part Replacement]]></category>
		<guid isPermaLink="false">https://www.hatcodirect.com/?p=21987</guid>

					<description><![CDATA[<p>A step-by-step tutorial for Installing a Retrofit Relay Kit In the food service industry, equipment breakdowns can cause major disruptions to operations leading to lost revenue and frustrated customers. FWEParts step-by-step tutorials are here to provide easy-to-follow guides that will help you can get your equipment back into operation as quickly as possible. In this [&#8230;]</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-install-a-retrofit-relay-kit-z-500-1056-in-fwe-mtu-series-cabinets/">How to Install a Retrofit Relay Kit (Z-500-1056) in FWE MTU Series Cabinets</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<h2 class="wp-block-heading">A step-by-step tutorial for Installing a Retrofit Relay Kit </h2>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">In the food service industry, equipment breakdowns can cause major disruptions to operations leading to lost revenue and frustrated customers. FWEParts step-by-step tutorials are here to provide easy-to-follow guides that will help you can get your equipment back into operation as quickly as possible. In this article, we will introduce a service video that provides a step-by-step tutorial to easily Troubleshoot an ELAN (T-STAT ELE) Control Board used on FWE units. If you are still experiencing issues with this, or any other part, please do not hesitate to reach out via phone at <a href="tel:16158053270">1-615-805-3270</a> or email at <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> if you have any questions or concerns.</p>



<figure class="wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio"><div class="wp-block-embed__wrapper">
<iframe loading="lazy" title="FWEParts | MTU Series | How to Install a Retrofit Relay Kit (Z-500-1056) in FWE MTU Series Cabinets" width="1140" height="641" src="https://www.youtube.com/embed/jcFRRZaHx-w?feature=oembed&#038;enablejsapi=1&#038;origin=https://www.hatcodirect.com" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
</div></figure>



<h2 class="wp-block-heading">Part Covered in this Tutorial</h2>



<ul class="wp-block-list">
<li><a href="https://www.hatcodirect.com/part/z-500-1056/">Z-500-1056</a></li>
</ul>



<h2 class="wp-block-heading">Tools Needed</h2>



<ul class="wp-block-list">
<li>Driver Drill with #2 Phillips Bit</li>



<li>1/4&#8243; Nut Driver</li>
</ul>



<h2 class="wp-block-heading">Steps</h2>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=jcFRRZaHx-w&amp;t=0s">0:00</a> | Introduction</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=jcFRRZaHx-w&amp;t=11s">0:11</a> | Step 1 &#8211; Unplug unit and remove from service</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=jcFRRZaHx-w&amp;t=16s">0:16</a> | Step 2 &#8211; Open the packaging and locate relay assembly with included wiring harness and wiring diagram. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=jcFRRZaHx-w&amp;t=22s">0:22</a> | Step 3 &#8211; Remove side panel from the unity and locate terminal block and element.</p>



<p class="wp-block-paragraph"> <a href="https://www.youtube.com/watch?v=jcFRRZaHx-w&amp;t=29s">0:29</a> | Step 4 &#8211; Remove existing wire (left side) from the element terminal and remove the terminal block,. Discard Wire. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=jcFRRZaHx-w&amp;t=36s">0:36</a> | Step 5 &#8211; Install the new wire (Wire #33) from the relay coil to the terminal block position #3 where the wire was removed from in step 4. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=jcFRRZaHx-w&amp;t=43s">0:43</a> | Step 6 &#8211; Remove the existing red wire (Wire #4) from the element terminal (Right side) and install on the other side of the relay coil. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=jcFRRZaHx-w&amp;t=54s">0:54</a> | Step 7 &#8211; Install black wire (Wire #30) on the terminal block position #2 where the incoming line power from cord is connected. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=jcFRRZaHx-w&amp;t=69s">1:09</a> | Step 8 &#8211; Install white wire (Wire #34) on the terminal block position #4 where the incoming neutral line from the cord is connected. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=jcFRRZaHx-w&amp;t=78s">1:18</a> | Step 9 &#8211; Install the red wire (Wire #31) onto the right side element terminal. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=jcFRRZaHx-w&amp;t=84s">1:24</a> | Step 10 &#8211; Install White wire (Wire #32) onto the left side element terminal. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=jcFRRZaHx-w&amp;t=91s">1:31</a> | Step 11 &#8211; Route wiring so it does not interfere with rear fan blade on the motor. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=jcFRRZaHx-w&amp;t=99s">1:39</a> | Step 12 &#8211; Mount the relay to the bottom of the compartment with your choice of fastener. (Zip screws recommended) </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=jcFRRZaHx-w&amp;t=109s">1:49</a> | Step 13 &#8211; Restore power and test the unit for operationality. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=jcFRRZaHx-w&amp;t=115s">1:55</a> | Step 14 &#8211; Reinstall side panel and return unit to service.</p>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">In the food service industry, equipment breakdowns can be disruptive and costly. That&#8217;s why FWEParts is committed to providing step-by-step tutorials that make equipment repairs a breeze. If you&#8217;re facing issues with installing retrofit kits, or anything other issue you may face, our service video offers a comprehensive guide to easily troubleshoot it using common tools. We&#8217;re here to support you every step of the way, so don&#8217;t hesitate to reach out to us at <a href="tel:1-615-805-3270">1-615-805-3270</a> or <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> if you have any questions or concerns. For a full list of video tutorials for FWE parts, check out this <a href="https://www.youtube.com/playlist?list=PLPyd_Uwy5f73F9oCC3NbIivtGe0p8fH4d">youtube playlist</a>.</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-install-a-retrofit-relay-kit-z-500-1056-in-fwe-mtu-series-cabinets/">How to Install a Retrofit Relay Kit (Z-500-1056) in FWE MTU Series Cabinets</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>How to Replace Heat and Water Elements in FWE Moisture-Temp Cabinets (MTU &#038;PHU) Series</title>
		<link>https://www.hatcodirect.com/how-to-replace-heat-and-water-elements-in-fwe-moisture-temp-cabinets-mtu-phu-series/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Wed, 17 May 2023 16:48:35 +0000</pubDate>
				<category><![CDATA[MTU Series]]></category>
		<category><![CDATA[PHU Series]]></category>
		<category><![CDATA[Service & Part Replacement]]></category>
		<category><![CDATA[Videos]]></category>
		<guid isPermaLink="false">https://www.hatcodirect.com/?p=21487</guid>

					<description><![CDATA[<p>A step-by-step tutorial for Replacing the Elements within a Moisture-Temp Cabinet In the food service industry, equipment breakdowns can cause major disruptions to operations leading to lost revenue and frustrated customers. FWEParts step-by-step tutorials are here to provide easy-to-follow guides that will help you can get your equipment back into operation as quickly as possible. [&#8230;]</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-replace-heat-and-water-elements-in-fwe-moisture-temp-cabinets-mtu-phu-series/">How to Replace Heat and Water Elements in FWE Moisture-Temp Cabinets (MTU &#038;PHU) Series</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<h2 class="wp-block-heading">A step-by-step tutorial for Replacing the Elements within a Moisture-Temp Cabinet </h2>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">In the food service industry, equipment breakdowns can cause major disruptions to operations leading to lost revenue and frustrated customers. FWEParts step-by-step tutorials are here to provide easy-to-follow guides that will help you can get your equipment back into operation as quickly as possible. In this article, we will introduce a service video that provides a step-by-step tutorial to easily replace the hot air element and water element used within FWE Moisture-Temp units. If you are still experiencing issues with this, or any other part, please do not hesitate to reach out via phone at <a href="tel:16158053270">1-615-805-3270</a> or email at <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> if you have any questions or concerns.</p>



<figure class="wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio"><div class="wp-block-embed__wrapper">
<iframe loading="lazy" title="How to Replace Heat and Water Elements in FWE Moisture-Temp Cabinets. (MTU &amp; PHU Series)" width="1140" height="641" src="https://www.youtube.com/embed/fwfXUdXOdcA?feature=oembed&#038;enablejsapi=1&#038;origin=https://www.hatcodirect.com" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
</div></figure>



<h2 class="wp-block-heading">Parts Covered in this Tutorial</h2>



<ul class="wp-block-list">
<li><a href="https://www.hatcodirect.com/part/el1250-120-ht/">EL1250-120-HT | Hot Air</a></li>



<li><a href="https://www.hatcodirect.com/part/el350-120-a16/">EL350-120-A16 | Water</a></li>
</ul>



<h2 class="wp-block-heading">Tools Needed</h2>



<ul class="wp-block-list">
<li>Driver Drill with #2 Phillips Bit</li>



<li>5/16&#8243; Nut Driver</li>



<li>1/4&#8243; Nut Driver</li>



<li>11/16&#8243; Socket Wrench</li>
</ul>



<h2 class="wp-block-heading">Steps</h2>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=fwfXUdXOdcA&amp;t=0s">0:00</a> &#8211; Introduction</p>



<p class="wp-block-paragraph"><strong>Replacing Hot Air Element</strong></p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=fwfXUdXOdcA&amp;t=18s">0:18</a> | Step 1: Open the unit and remove the heart tunnel assembly exposing the element and blower housing.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=fwfXUdXOdcA&amp;t=27s">0:27</a> | Step 2: Remove the side panel and locate the element.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=fwfXUdXOdcA&amp;t=35s">0:35</a> | Step 3: Disconnect the element connections and remove the element by taking off the nuts and washers. Pull the element out from the blower housing and discard it.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=fwfXUdXOdcA&amp;t=55s">0:55</a> | Step 4: Install the new element through the blower housing, locking it in place with the nuts and washers used in Step 3.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=fwfXUdXOdcA&amp;t=71s">1:11</a> | Step 5: Reconnect the element connections.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=fwfXUdXOdcA&amp;t=77s">1:17</a> | Step 6: Restore power and test the unit for operationality.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=fwfXUdXOdcA&amp;t=84s">1:24</a> | Step 7: Reinstall the side panel and heat tunnel assembly. Return unit to service.</p>



<p class="wp-block-paragraph"><strong>Replacing the Water Element</strong></p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=fwfXUdXOdcA&amp;t=92s">1:32</a> | Step 1: Open the unit and remove the heat tunnel assembly. Remove the water pan from the bottom of the unit.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=fwfXUdXOdcA&amp;t=106s">1:46</a> | Step 2: Locate the element under the water pan, Remove the two screws securing the element in place.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=fwfXUdXOdcA&amp;t=113s">1:53</a> | Step 3: Pull the element out and remove the wire connections from the element terminals. Discard the old element.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=fwfXUdXOdcA&amp;t=122s">2:02</a> | Step 4: Install wire connection onto the new element terminals.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=fwfXUdXOdcA&amp;t=129s">2:09</a> | Step 5: Push the new element back into place, aligning the gasket with the back plate. Secure with screws that were removed in Step 2.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=fwfXUdXOdcA&amp;t=135s">2:15</a> | Step 6: Reinstall the water pan and fill it with water. Restore power and test unit for operationality.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=fwfXUdXOdcA&amp;t=146s">2:26</a> | Step 7: Reinstall the heat tunnel assembly and return the unit to service.</p>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">In the food service industry, equipment breakdowns can be disruptive and costly. That&#8217;s why FWEParts is committed to providing step-by-step tutorials that make equipment repairs a breeze. If you&#8217;re facing issues replacing the hot air or water elements used within FWE Moisture Temp units, our service video offers a comprehensive guide to easily troubleshoot it using common tools. We&#8217;re here to support you every step of the way, so don&#8217;t hesitate to reach out to us at 1-615-805-3270 or <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> if you have any questions or concerns. For a full list of video tutorials for FWE parts, check out this <a href="https://www.youtube.com/playlist?list=PLPyd_Uwy5f73F9oCC3NbIivtGe0p8fH4d">youtube playlist</a>.</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-replace-heat-and-water-elements-in-fwe-moisture-temp-cabinets-mtu-phu-series/">How to Replace Heat and Water Elements in FWE Moisture-Temp Cabinets (MTU &#038;PHU) Series</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>How to Replace the Motor in FWE Moisture-Temp Cabinets (MTU &#038; PHU Series)</title>
		<link>https://www.hatcodirect.com/how-to-replace-the-motor-in-fwe-moisture-temp-cabinets-mtu-phu-series/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Mon, 15 May 2023 20:25:48 +0000</pubDate>
				<category><![CDATA[MTU Series]]></category>
		<category><![CDATA[PHU Series]]></category>
		<category><![CDATA[Service & Part Replacement]]></category>
		<category><![CDATA[Videos]]></category>
		<guid isPermaLink="false">https://www.hatcodirect.com/?p=21476</guid>

					<description><![CDATA[<p>A step-by-step tutorial for Replacing the Motor in FWE Moisture-Temp Cabinets In the food service industry, equipment breakdowns can cause major disruptions to operations leading to lost revenue and frustrated customers. FWEParts step-by-step tutorials are here to provide easy-to-follow guides that will help you can get your equipment back into operation as quickly as possible. [&#8230;]</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-replace-the-motor-in-fwe-moisture-temp-cabinets-mtu-phu-series/">How to Replace the Motor in FWE Moisture-Temp Cabinets (MTU &#038; PHU Series)</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<h2 class="wp-block-heading">A step-by-step tutorial for Replacing the Motor in FWE Moisture-Temp Cabinets</h2>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">In the food service industry, equipment breakdowns can cause major disruptions to operations leading to lost revenue and frustrated customers. FWEParts step-by-step tutorials are here to provide easy-to-follow guides that will help you can get your equipment back into operation as quickly as possible. In this article, we will introduce a service video that provides a step-by-step tutorial to easily replace the motor used on FWE Moisture-Temp Cabinets(MTU and PHU Series). If you are still experiencing issues with this, or any other part, please do not hesitate to reach out via phone at <a href="tel:16158053270">1-615-805-3270</a> or email at <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> if you have any questions or concerns.</p>



<figure class="wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio"><div class="wp-block-embed__wrapper">
<iframe loading="lazy" title="How to Replace the Motor (Z-600-6151) in FWE Moisture-Temp Cabinets. (MTU &amp; PHU Series)" width="1140" height="641" src="https://www.youtube.com/embed/uoOIfzFE8dw?feature=oembed" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
</div></figure>



<h2 class="wp-block-heading">Parts Covered in this Tutorial</h2>



<ul class="wp-block-list">
<li><a href="https://www.hatcodirect.com/part/z-600-6151/">Z-600-6151</a></li>
</ul>



<h2 class="wp-block-heading">Tools Needed</h2>



<ul class="wp-block-list">
<li>Driver Drill with #2 Phillips Bit</li>



<li>5/16&#8243; Nut Driver</li>



<li>1/4&#8243; Nut Driver</li>



<li>11/16&#8243; Socket Wrench</li>



<li>Allen Key Set</li>
</ul>



<h2 class="wp-block-heading">Steps</h2>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=uoOIfzFE8dw&amp;t=0s">0:00</a> | Introduction</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=uoOIfzFE8dw&amp;t=17s">0:17</a> | Step 1: Open the unit and remove the heart tunnel assembly exposing the element and blower housing.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=uoOIfzFE8dw&amp;t=24s">0:24</a> | Step 2: Remove the side panel and locate the motor assembly.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=uoOIfzFE8dw&amp;t=31s">0:31</a> | Step 3: Remove the motor connections at the terminal block, making note of their positions.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=uoOIfzFE8dw&amp;t=38s">0:38</a> | Step 4: Disconnect the element connections and remove the element by taking off the nuts and washers and pulling it out from the blower housing.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=uoOIfzFE8dw&amp;t=59s">0:59</a> | Step 5: Remove the bolts holding the blower housing to the sidewall and set them aside.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=uoOIfzFE8dw&amp;t=67s">1:07</a> | Step 6: Locate the set screw on the fan blade. Loosen and remove the fan blade from the motor shaft.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=uoOIfzFE8dw&amp;t=75s">1:15</a> | Step 7: In the access panel, remove the bolts holding the motor in place and pull the motor assembly out.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=uoOIfzFE8dw&amp;t=85s">1:25</a> | Step 8: Locate the set screw for the rear fan blade. Loosen and remove the fan blade from the motor shaft.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=uoOIfzFE8dw&amp;t=92s">1:32</a> | Step 9: Install the rear fan blade on the new motor, locking it in place with the set screw.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=uoOIfzFE8dw&amp;t=98s">1:38</a> | Step 10: Install the new motor, using the bolts from Step 7 to secure it in place.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=uoOIfzFE8dw&amp;t=107s">1:47</a> | Step 11: Inside the unit, install the front blade onto the motor shaft, locking it in place with the set screw. (Ensure the blade spins free and clear of obstruction)</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=uoOIfzFE8dw&amp;t=114s">1:54</a> | Step 12: Remount the blower housing with the bolts used in Step 5.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=uoOIfzFE8dw&amp;t=123s">2:03</a> | Step 13: Reinstall the Element through the blower housing, locking it in place with the nuts used in Step 4.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=uoOIfzFE8dw&amp;t=138s">2:18</a> | Step 14: Reconnect the element connections.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=uoOIfzFE8dw&amp;t=145s">2:25</a> | Step 15: Reconnect the motor connections to the terminal block, making sure the wiring is clear of the rear blade.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=uoOIfzFE8dw&amp;t=156s">2:36</a> | Step 16: Restore the power and test the unit for operationality.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=uoOIfzFE8dw&amp;t=163s">2:43</a> | Step 17: Reinstall the side panel and heat tunnel assembly, then return the unit to service.</p>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">In the food service industry, equipment breakdowns can be disruptive and costly. That&#8217;s why FWEParts is committed to providing step-by-step tutorials that make equipment repairs a breeze. If you&#8217;re facing issues with the motor used in Moisture-Temp FWE units, our service video offers a comprehensive guide to easily troubleshoot it using common tools. We&#8217;re here to support you every step of the way, so don&#8217;t hesitate to reach out to us at 1-615-805-3270 or <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> if you have any questions or concerns. For a full list of video tutorials for FWE parts, check out this <a href="https://www.youtube.com/playlist?list=PLPyd_Uwy5f73F9oCC3NbIivtGe0p8fH4d">youtube playlist</a>.</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-replace-the-motor-in-fwe-moisture-temp-cabinets-mtu-phu-series/">How to Replace the Motor in FWE Moisture-Temp Cabinets (MTU &#038; PHU Series)</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></content:encoded>
					
		
		
			</item>
	</channel>
</rss>
