<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>LCH-G2 Series - OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</title>
	<atom:link href="https://www.hatcodirect.com/category/series/lch-g2-series/feed/" rel="self" type="application/rss+xml" />
	<link>https://www.hatcodirect.com/category/series/lch-g2-series/</link>
	<description>OEM Parts for Hatco Equipment &#124; Hatco Trade Direct Parts</description>
	<lastBuildDate>Wed, 26 Jun 2024 17:04:34 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	

<image>
	<url>https://www.hatcodirect.com/wp-content/uploads/2025/02/hatco-direct-oem-parts-icon-32x32.jpg</url>
	<title>LCH-G2 Series - OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</title>
	<link>https://www.hatcodirect.com/category/series/lch-g2-series/</link>
	<width>32</width>
	<height>32</height>
</image> 
	<item>
		<title>How to Perform Door and Latch Adjustments on FWE Units</title>
		<link>https://www.hatcodirect.com/how-to-perform-door-and-latch-adjustments-on-fwe-units/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Wed, 26 Jun 2024 17:04:28 +0000</pubDate>
				<category><![CDATA[A Series]]></category>
		<category><![CDATA[A-XL Series]]></category>
		<category><![CDATA[BT Series]]></category>
		<category><![CDATA[E Series]]></category>
		<category><![CDATA[E-XL Series]]></category>
		<category><![CDATA[E-XXL Series]]></category>
		<category><![CDATA[HHC Series]]></category>
		<category><![CDATA[HHS Series]]></category>
		<category><![CDATA[HLC Series]]></category>
		<category><![CDATA[LCH Series]]></category>
		<category><![CDATA[LCH-G2 Series]]></category>
		<category><![CDATA[LCH-LV-G2 Series]]></category>
		<category><![CDATA[LCH-SK-G2 Series]]></category>
		<category><![CDATA[LCHR Series]]></category>
		<category><![CDATA[MTU Series]]></category>
		<category><![CDATA[PHTT Series]]></category>
		<category><![CDATA[PHU Series]]></category>
		<category><![CDATA[PST Series]]></category>
		<category><![CDATA[PTST Series]]></category>
		<category><![CDATA[RH Series]]></category>
		<category><![CDATA[RH-B Series]]></category>
		<category><![CDATA[RH-RB Series]]></category>
		<category><![CDATA[Series]]></category>
		<category><![CDATA[TST Series]]></category>
		<category><![CDATA[TST-SL Series]]></category>
		<category><![CDATA[TST-TB Series]]></category>
		<category><![CDATA[UHST Series]]></category>
		<category><![CDATA[Uncategorized]]></category>
		<guid isPermaLink="false">https://www.hatcodirect.com/?p=23538</guid>

					<description><![CDATA[<p>A Step-by-Step Guide to Fine-Tuning Your FWE Units for Peak Performance Maintaining the proper function of your equipment is essential for the smooth operation of your food service business. At FWEParts, we understand the importance of ensuring your units are in top condition. This guide, &#8220;How to Perform Door and Latch Adjustments on FWE Units,&#8221; [&#8230;]</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-perform-door-and-latch-adjustments-on-fwe-units/">How to Perform Door and Latch Adjustments on FWE Units</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">A Step-by-Step Guide to Fine-Tuning Your FWE Units for Peak Performance</p>



<p class="wp-block-paragraph">Maintaining the proper function of your equipment is essential for the smooth operation of your food service business. At FWEParts, we understand the importance of ensuring your units are in top condition. This guide, &#8220;How to Perform Door and Latch Adjustments on FWE Units,&#8221; provides step-by-step instructions to help you keep your doors and latches operating perfectly. With clear and concise steps, you&#8217;ll be able to address issues such as improper door closure and latch malfunction, ensuring your equipment performs reliably. For any additional assistance or inquiries, our dedicated support team is always available. Contact us at 1-615-805-3270 or <a>service@hatcodirect.com</a> for expert guidance.</p>



<figure class="wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio"><div class="wp-block-embed__wrapper">
<iframe title="FWEParts | How to Perform Door and Latch Adjustments" width="1140" height="641" src="https://www.youtube.com/embed/ad_wMEO4rwk?feature=oembed" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>
</div></figure>



<h2 class="wp-block-heading">Tools Needed</h2>



<ul class="wp-block-list">
<li>Driver Drill with #2 Phillips Bit</li>



<li>Flat Blade Screwdriver</li>



<li>Level</li>
</ul>



<p class="wp-block-paragraph"></p>



<h2 class="wp-block-heading">Steps</h2>



<p class="wp-block-paragraph"><strong>Door Adjustment</strong>  (If the door is not closing properly) </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=21s">0:21</a> | Step 1: Locate and remove hinge covers from the door hinges. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=33s">0:33</a> | Step 2: Loosen all screws that mount the hinges to both the door and the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=43s">0:43</a> | Step 3: Carefully adjust the door in and out, and side to side taking note of the door leveling and any gaps. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=51s">0:51</a> | Step 4: With the door in a level position, retighten the screws loosened in Step 2. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=59s">0:59</a> | Step 5: Test the door for proper sealing and closure. Re[peat steps 2 &#8211; 4 as needed. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=65s">1:05</a> | Step 6: Once the door seals properly and is level, reinstall the hinge covers and return the unit to service. </p>



<p class="wp-block-paragraph"><strong>Latch Adjustment</strong> (if the door is not latching properly) </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=76s">1:16</a> | Step 1: Locate the door latch and screw for the J-Hook on the bottom side of the latch. Loosen the screw. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=87s">1:27</a> | Step 2: Carefully adjust the J-Hook in and out, tightening the screw and then testing the closure of the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=93s">1:33</a> | Step 3: Repeat Steps 1 &amp; 2 as needed. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=ad_wMEO4rwk&amp;t=100s">1:40</a> | Step 4 Once the floor handle properly locks onto the latch, confirm the J-Hook is sufficiently high and in place. Test the door for proper sealing and return the unit to service.</p>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">As we conclude this guide on performing door and latch adjustments on FWE units, we hope the instructions have been clear and helpful. At FWEParts, our priority is to ensure your equipment operates flawlessly, supporting the efficiency and success of your food service business. If you require further guidance on these adjustments or have any other questions, our expert team is always here to assist you. Feel free to contact us at 1-615-805-3270 or <a>service@hatcodirect.com</a> for personalized support. We&#8217;re dedicated to your success and are just a call or an email away.</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-perform-door-and-latch-adjustments-on-fwe-units/">How to Perform Door and Latch Adjustments on FWE Units</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>How to Edit the Temperature Display on M-Wave Control Boards</title>
		<link>https://www.hatcodirect.com/how-to-edit-the-temperature-display-on-m-wave-control-boards/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Mon, 24 Jun 2024 20:46:25 +0000</pubDate>
				<category><![CDATA[LCH Series]]></category>
		<category><![CDATA[LCH-G2 Series]]></category>
		<category><![CDATA[LCH-LV-G2 Series]]></category>
		<category><![CDATA[LCHR Series]]></category>
		<category><![CDATA[RH Series]]></category>
		<category><![CDATA[RH-B Series]]></category>
		<category><![CDATA[RH-RB Series]]></category>
		<category><![CDATA[Uncategorized]]></category>
		<guid isPermaLink="false">https://www.hatcodirect.com/?p=22540</guid>

					<description><![CDATA[<p>A simple step-by-step guide to editing the temperature display on FWE units utilizing M-Wave Control Boards Welcome to our quick and easy guide on editing the temperature display on FWE&#8217;s M-Wave Control Boards. Whether you need to switch between Fahrenheit (°F) and Celsius (°C), this guide will walk you through the process step-by-step. At FWEParts, [&#8230;]</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-edit-the-temperature-display-on-m-wave-control-boards/">How to Edit the Temperature Display on M-Wave Control Boards</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">A simple step-by-step guide to editing the temperature display on FWE units utilizing M-Wave Control Boards</p>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">Welcome to our quick and easy guide on editing the temperature display on FWE&#8217;s M-Wave Control Boards. Whether you need to switch between Fahrenheit (°F) and Celsius (°C), this guide will walk you through the process step-by-step. At FWEParts, we understand the importance of having accurate and easily understandable temperature readings for your equipment. This guide will help you make the necessary adjustments effortlessly, ensuring your control boards display the temperature in your preferred unit. For any additional support or questions, our expert team is always available. Contact us at 1-615-805-3270 or <a>service@hatcodirect.com</a> for personalized assistance.</p>



<figure class="wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio"><div class="wp-block-embed__wrapper">
<iframe title="FWE | How to Edit the Temperature Display | M Wave Control Boards" width="1140" height="641" src="https://www.youtube.com/embed/Nw3t2se_WqA?feature=oembed" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
</div></figure>



<h2 class="wp-block-heading">Parts Covered in this Tutorial</h2>



<ul class="wp-block-list">
<li><a href="https://www.hatcodirect.com/part/z-500-1039/?_gl=1*jul41e*_up*MQ..&amp;gclid=CjwKCAjwjqWzBhAqEiwAQmtgTz-0MrQc1gbR_BOZDM41yW5Et6O_sbQg7QuXN8Uk802uVC4E-dbaxBoC1NIQAvD_BwE">Z-500-1039</a></li>



<li><a href="https://www.hatcodirect.com/part/z-500-1040/?_gl=1*1bxgkvl*_up*MQ..&amp;gclid=CjwKCAjwjqWzBhAqEiwAQmtgTz-0MrQc1gbR_BOZDM41yW5Et6O_sbQg7QuXN8Uk802uVC4E-dbaxBoC1NIQAvD_BwE">Z-500-1040</a></li>



<li><a href="https://www.hatcodirect.com/part/z-500-1041/?_gl=1*1aoxle4*_up*MQ..&amp;gclid=CjwKCAjwjqWzBhAqEiwAQmtgTz-0MrQc1gbR_BOZDM41yW5Et6O_sbQg7QuXN8Uk802uVC4E-dbaxBoC1NIQAvD_BwE">Z-500-1041</a></li>



<li><a href="https://www.hatcodirect.com/part/z-500-1043/?_gl=1*1aoxle4*_up*MQ..&amp;gclid=CjwKCAjwjqWzBhAqEiwAQmtgTz-0MrQc1gbR_BOZDM41yW5Et6O_sbQg7QuXN8Uk802uVC4E-dbaxBoC1NIQAvD_BwE">Z-500-1043</a></li>
</ul>



<h2 class="wp-block-heading">Tools Needed</h2>



<ul class="wp-block-list">
<li>None!</li>
</ul>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">We hope this guide has made it simple for you to edit the temperature display on your FWE M-Wave Control Boards. At FWEParts, our goal is to ensure your equipment operates according to your specific needs and preferences. Should you need further assistance or have any additional questions, our dedicated support team is here to help. Don’t hesitate to reach out to us at 1-615-805-3270 or <a>service@hatcodirect.com</a> for expert guidance. We&#8217;re committed to your success and are always just a call or an email away.</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-edit-the-temperature-display-on-m-wave-control-boards/">How to Edit the Temperature Display on M-Wave Control Boards</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>How to Replace and Perform General Service on Doors</title>
		<link>https://www.hatcodirect.com/how-to-replace-and-perform-general-service-on-doors/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Wed, 07 Feb 2024 18:23:49 +0000</pubDate>
				<category><![CDATA[A Series]]></category>
		<category><![CDATA[A-XL Series]]></category>
		<category><![CDATA[E Series]]></category>
		<category><![CDATA[E-XL Series]]></category>
		<category><![CDATA[E-XXL Series]]></category>
		<category><![CDATA[HHS Series]]></category>
		<category><![CDATA[LCH Series]]></category>
		<category><![CDATA[LCH-G2 Series]]></category>
		<category><![CDATA[LCH-SK-G2 Series]]></category>
		<category><![CDATA[MTU Series]]></category>
		<category><![CDATA[PHTT Series]]></category>
		<category><![CDATA[PHU Series]]></category>
		<category><![CDATA[RH Series]]></category>
		<category><![CDATA[Series]]></category>
		<category><![CDATA[TST-SL Series]]></category>
		<category><![CDATA[Uncategorized]]></category>
		<guid isPermaLink="false">https://www.hatcodirect.com/?p=22542</guid>

					<description><![CDATA[<p>A helpful step-by-step guide to both performing general maintenance and replacing the doors used on FWE units In the dynamic environment of the food service industry, the functionality of every component, including doors, plays a vital role in operational efficiency and customer satisfaction. Recognizing this, FWEParts is committed to providing easy-to-follow, practical guides for maintaining [&#8230;]</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-replace-and-perform-general-service-on-doors/">How to Replace and Perform General Service on Doors</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">A helpful step-by-step guide to both performing general maintenance and replacing the doors used on FWE units</p>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">In the dynamic environment of the food service industry, the functionality of every component, including doors, plays a vital role in operational efficiency and customer satisfaction. Recognizing this, FWEParts is committed to providing easy-to-follow, practical guides for maintaining and servicing your FWE equipment. In our latest tutorial, we delve into the specifics of how to replace and perform general service to doors on FWE units. This guide is designed to empower you with the knowledge needed to ensure your equipment operates at its best. For any additional assistance or inquiries, our support team is readily available. Reach out to us at 1-615-805-3270 or send an email to <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> for expert advice and guidance.</p>



<figure class="wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio"><div class="wp-block-embed__wrapper">
<iframe title="FWE | How to Replace and Perform General Service to Doors" width="1140" height="641" src="https://www.youtube.com/embed/hTEgCKdHEvc?feature=oembed" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
</div></figure>



<h2 class="wp-block-heading">Ordering Replacement Doors and Replacement Door Parts</h2>



<ul class="wp-block-list">
<li>If you need to order new doors for your FWE unit, please follow <strong><a href="https://www.hatcodirect.com/product-category/tops-doors-metal-parts/page/1/">this</a></strong> link for a comprehensive selection and an easy purchasing process</li>
</ul>



<h2 class="wp-block-heading"><strong>Tools Needed</strong></h2>



<ul class="wp-block-list">
<li>Driver Drill with #2 Phillips Bit</li>



<li>Flathead Screwdriver</li>



<li>Small Screwdriver (Regular or Phillips)</li>



<li>Needle Nose Pliers</li>
</ul>



<p class="wp-block-paragraph"></p>



<h2 class="wp-block-heading">Steps</h2>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=0s">0:00</a> | Introduction</p>



<p class="wp-block-paragraph"> <strong>Door Adjustment</strong></p>



<p class="wp-block-paragraph"> <a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=24s">0:24</a> | Step 1: Locate door hinges and remove the hinge covers </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=39s">0:39</a> | Step 2: Loosen all the screws that mount the hinges to both the door and the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=46s">0:46</a> | Step 3: Carefully adjust the door in and out and side to side, taking note of the door leveling and any gaps. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=55s">0:55</a> | Step 4: Retighten screws loosened in Step 2. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=69s">1:09</a> | Step 5: Test door for proper sealing. Repeat Steps 2 &#8211; 4 as needed. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=76s">1:16</a> | Step 6: Once the floor seals properly and is level, reinstall the hinge covers and return the unit to service. </p>



<p class="wp-block-paragraph"><strong>Door Reversal (Hinging Swap for Standard Doors)</strong> </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=85s">1:25</a> | Step 1: Locate the door hinges and remove the covers in the middle of the hinge. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=102s">1:42</a> | Step 2: Remove screws that mount the hinges to the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=115s">1:55</a> | Step 3: Flip the door 180 degrees and reinstall the unit using the same hardware that was removed previously. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=129s">2:09</a> | Step 4: Test the door for proper sealing, then reinstall the hinge covers and return the unit to service. (The FWE decal can be flipped and moved to the top of the flipped door &#8211; Contact the FWE Service Department if a new decal is required.) </p>



<p class="wp-block-paragraph"><strong>Door Reversal (Hinging Swap for Doors with Spring Kit)</strong></p>



<p class="wp-block-paragraph"> <a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=139s">2:19</a> | Step 1: Locate the door hinges and remove the covers in the middle of the hinge, exposing the spring.</p>



<p class="wp-block-paragraph"> <a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=155s">2:35</a> | Step 2: On top of the spring, locate the keeper pin. Using a small screwdriver, relieve tension from the spring while removing the keeper pin.</p>



<p class="wp-block-paragraph"> <a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=165s">2:45</a> | Step 3: Once the keeper pin is removed, relieve pressure from the spring. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=172s">2:52</a> | Step 4: Using a flat screwdriver, pry the spring out of the holder. This will expose the screws so the door can be removed from the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=182s">3:02</a> | Step 5: Remove the screws that mount the hinges to the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=196s">3:16</a> | Step 6: Flip the door 180 degrees and reinstall it on the unit using the same hardware previously removed. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=208s">3:28</a> | Step 7: Pretension the spring on the hinge using a small screwdriver inserted into the hole where the keeper pin goes. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=216s">3:36</a> | Step 8: Set top door spring tension by turning the collar on the spring 3 holes and inserting the keeper pin so that the tension holds it in place. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=236s">3:56</a> | Step 9: Set the bottom door spring tension by turning the collar on the spring 2 holes and inserting the keeper pin so that the tension holds it in place. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=244s">4:04</a> | Step 10: Once tensions have been set, test doors to make sure they seal properly. Return the unit to service. (The FWE decal can be flipped and moved to the top of the flipped door &#8211; Contact the FWE Service Department if a new decal is required.) </p>



<p class="wp-block-paragraph"><strong>Hinge Replacement (Standard Door)</strong> </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=255s">4:15</a> | Step 1: Locate the door hinges and remove the covers in the middle of the hinge. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=270s">4:30</a> | Step 2: Remove the screws mounting hinges to the unit and carefully set the door aside. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=283s">4:43</a> | Step 3: Remove the screws mounting the hinges to the door. Discard old hinges. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=291s">4:51</a> | Step 4: Using the screws removed in Step 3, install the new hinges onto the door. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=297s">4:57</a> | Step 5: Remount the door using screws removed in Step 2, securing the hinges to the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=307s">5:07</a> | Step 6: Check the door for proper sealing and operationality. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=314s">5:14</a> | Step 7: Reinstall the hinges covers and return the unit to service. </p>



<p class="wp-block-paragraph"><strong>Hinge Replacement (Doors with Spring Kit)</strong> </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=325s">5:25</a> | Step 1: Locate the door hinges and remove the covers in the middle of the hinge, exposing the spring. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=333s">5:33</a> | Step 2: Locate the keeper pin on top of the spring. Using a small screwdriver, relieve tension from the spring while removing the keeper pin.</p>



<p class="wp-block-paragraph"> <a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=345s">5:45</a> | Step 3: Once the keeper pin is removed, relieve pressure from the spring. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=352s">5:52</a> | Step 4: Using a flat screwdriver, pry the spring out of the holder. This will expose the screws so the door can be removed from the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=362s">6:02</a> | Step 5: Remove the screws mounting hinges to the unit and carefully set for aside. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=376s">6:16</a> | Step 6: Remove the screws mounting the hinges to the door. Discard old hinges. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=383s">6:23</a> | Step 7: Using the screws removed in Step 6, install the new hinges onto the door.</p>



<p class="wp-block-paragraph"> <a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=390s">6:30</a> | Step 8: Remount the door using the screws removed in Step 5, securing the hinges to the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=400s">6:40</a> | Step 9: Reinstall the spring removed in Step 4. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=405s">6:45</a> | Step 10: Pretension the spring on the hinge using a small screwdriver inserted into the hole where the keeper pin goes. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=413s">6:53</a> | Step 11: Set the top door spring by turning the collar on the spring 3 holes and inserting the keeper pin so that the tension holds it in place.</p>



<p class="wp-block-paragraph"> <a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=432s">7:12</a> | Step 12: Set the bottom door spring tension by turning the spring 2 holes and inserting the keeper pin so that the tension holds it in place. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=hTEgCKdHEvc&amp;t=443s">7:23</a> | Step 13: Once tensions have been set, test to make sure they seal properly. Reinstall thing covers and return the unit to service.</p>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">As we conclude this guide on replacing and servicing doors on FWE units, we hope you have found the information both informative and easy to follow. At FWEParts, our goal is to ensure your equipment functions flawlessly, contributing to the smooth operation of your food service business. Remember, our team is always here to support you, whether it&#8217;s for further guidance on maintenance tasks or addressing any other concerns you might have. Don’t hesitate to contact us at 1-615-805-3270 or through email at <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> for personalized assistance. We&#8217;re dedicated to your success and are just a call or an email away.</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-replace-and-perform-general-service-on-doors/">How to Replace and Perform General Service on Doors</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>How to Replace Casters used on FWE Units</title>
		<link>https://www.hatcodirect.com/how-to-replace-casters-used-on-fwe-units/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Wed, 07 Feb 2024 17:36:29 +0000</pubDate>
				<category><![CDATA[A Series]]></category>
		<category><![CDATA[A-XL Series]]></category>
		<category><![CDATA[E Series]]></category>
		<category><![CDATA[E-XL Series]]></category>
		<category><![CDATA[E-XXL Series]]></category>
		<category><![CDATA[HHS Series]]></category>
		<category><![CDATA[LCH Series]]></category>
		<category><![CDATA[LCH-G2 Series]]></category>
		<category><![CDATA[LCH-SK-G2 Series]]></category>
		<category><![CDATA[MTU Series]]></category>
		<category><![CDATA[PHTT Series]]></category>
		<category><![CDATA[PHU Series]]></category>
		<category><![CDATA[RH Series]]></category>
		<category><![CDATA[Series]]></category>
		<category><![CDATA[TST-SL Series]]></category>
		<category><![CDATA[Uncategorized]]></category>
		<guid isPermaLink="false">https://www.hatcodirect.com/?p=22544</guid>

					<description><![CDATA[<p>A step-by-step guide to easily replace the casters on your FWE unit In the bustling world of the food service industry, the mobility and stability of your equipment is essential for efficient operation and service excellence. At FWEParts, we are dedicated to ensuring that every aspect of your FWE equipment functions optimally. This includes providing [&#8230;]</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-replace-casters-used-on-fwe-units/">How to Replace Casters used on FWE Units</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph"><strong>A step-by-step guide to easily replace the casters on your FWE unit</strong></p>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">In the bustling world of the food service industry, the mobility and stability of your equipment is essential for efficient operation and service excellence. At FWEParts, we are dedicated to ensuring that every aspect of your FWE equipment functions optimally. This includes providing detailed, user-friendly guides for essential maintenance tasks. Our latest tutorial focuses on how to replace casters on FWE units, a key step in maintaining the maneuverability and safety of your equipment. With this guide, you&#8217;ll be equipped with the knowledge to perform this task swiftly and effectively. For any questions or further assistance, our expert team is always on standby. Feel free to contact us at 1-615-805-3270 or email us at <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> for any help you may need.</p>



<figure class="wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio"><div class="wp-block-embed__wrapper">
<iframe loading="lazy" title="FWE | How to Replace Casters" width="1140" height="641" src="https://www.youtube.com/embed/FzOrEXqvJZs?feature=oembed" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
</div></figure>



<h2 class="wp-block-heading">Ordering Replacement Casters</h2>



<p class="wp-block-paragraph">If you are in need of new casters for your FWE unit, you can easily find and purchase them by visiting <a href="https://www.hatcodirect.com/product-category/casters-legs-and-hardware/casters/page/1/"><strong>this link</strong></a>. Our selection ensures you get the right match for your equipment, guaranteeing quality and compatibility.</p>



<h2 class="wp-block-heading">Tools Needed</h2>



<ul class="wp-block-list">
<li>Socket Wrench with 1/2&#8243; Socket</li>



<li>Socket Extender</li>
</ul>



<h2 class="wp-block-heading">Steps</h2>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=0s">0:00</a> | Introduction </p>



<p class="wp-block-paragraph"><strong>Replacing Casters (Non Refrigeration)</strong> </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=24s">0:24</a> | Step 1: Remove all racks, tray slides, and/or shelving inside the unit. Place the unit onto its back, using a buffer such as cardboard or styrofoam to prevent scratches to the outside of the unit.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=35s">0:35</a> | Step 2: Using a socket wrench, remove the four nuts and washers mounting the caster to the unit. Remove and discard the caster. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=51s">0:51</a> | Step 3: Install new caster, making sure studs line up with the caster plate. Use nuts and washers removed in Step 2 to mount in place. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=76s">1:16</a> | Step 4: Place the unit upright and test for functionality. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=85s">1:25</a> | Step 5: Reinstall all racks, tray slides, and/or shelving inside the unit. Return to service. </p>



<p class="wp-block-paragraph"><strong>Replacing Casters (Refrigeration)</strong> </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=90s">1:30</a> | Step 1: Remove all racks, tray slides, and/or shelving inside the unit. Using a lift, raise the unit in the air for clearance tall enough for tools underneath the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=121s">2:01</a> | Step 2: Using a socket wrench, remove the four nuts and washers mounting the caster to the unit. Remove and discard the caster. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=137s">2:17</a> | Step 3: Install new caster, making sure studs line up with the caster plate. Use nuts and washers removed in Step 2 to mount in place. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=157s">2:37</a> | Step 4: Set the unit back down and remove off the lift. Test for operationality. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=FzOrEXqvJZs&amp;t=165s">2:45</a> | Step 5: Reinstall all racks, tray slides, and/or shelving inside the unit. Return to service.</p>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">As we wrap up this guide on replacing casters for FWE units, we trust that you have found the instructions clear and helpful. Our commitment at FWEParts is to provide you with the resources and support you need to keep your equipment running smoothly and efficiently. Remember, our team is here to assist you with any additional questions or guidance you may require in maintaining your FWE equipment. Please don’t hesitate to reach out to us at 1-615-805-3270 or via email at <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> for personalized support. Your success in the food service industry is our priority, and we are always ready to help ensure your equipment performs at its best.</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-replace-casters-used-on-fwe-units/">How to Replace Casters used on FWE Units</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>How to Replace the Cavity Probe and Meat Probe Socket on FWE LCH Units</title>
		<link>https://www.hatcodirect.com/how-to-replace-the-cavity-probe-and-meat-probe-socket-on-fwe-lch-units/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Mon, 14 Aug 2023 19:07:28 +0000</pubDate>
				<category><![CDATA[LCH Series]]></category>
		<category><![CDATA[LCH-G2 Series]]></category>
		<category><![CDATA[Service & Part Replacement]]></category>
		<category><![CDATA[Uncategorized]]></category>
		<guid isPermaLink="false">https://www.hatcodirect.com/?p=21985</guid>

					<description><![CDATA[<p>A step-by-step tutorial for Replacing the Elements within a Moisture-Temp Cabinet In the food service industry, equipment breakdowns can cause major disruptions to operations leading to lost revenue and frustrated customers. FWEParts step-by-step tutorials are here to provide easy-to-follow guides that will help you can get your equipment back into operation as quickly as possible. [&#8230;]</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-replace-the-cavity-probe-and-meat-probe-socket-on-fwe-lch-units/">How to Replace the Cavity Probe and Meat Probe Socket on FWE LCH Units</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<h3 class="wp-block-heading">A step-by-step tutorial for Replacing the Elements within a Moisture-Temp Cabinet </h3>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">In the food service industry, equipment breakdowns can cause major disruptions to operations leading to lost revenue and frustrated customers. FWEParts step-by-step tutorials are here to provide easy-to-follow guides that will help you can get your equipment back into operation as quickly as possible. In this article, we will introduce a service video that provides a step-by-step tutorial to easily replace the Cavity Probe and Meat Probe Socket used within FWE LCH units. If you are still experiencing issues with this, or any other part, please do not hesitate to reach out via phone at <a href="tel:16158053270">1-615-805-3270</a> or email at <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> if you have any questions or concerns.</p>



<figure class="wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio"><div class="wp-block-embed__wrapper">
<iframe loading="lazy" title="FWEParts | LCH-G2 Series | How to Replace the Cavity Probe and Meat Probe Socket" width="1140" height="641" src="https://www.youtube.com/embed/t6ybIbKfkTo?feature=oembed" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
</div></figure>



<h3 class="wp-block-heading">Parts Covered in this Tutorial</h3>



<ul class="wp-block-list">
<li> Cavity Probe |<a href="https://www.hatcodirect.com/part/prb-rtd/"> PRB RTD </a></li>



<li> Meat Probe | <a href="https://www.hatcodirect.com/part/prb-rtd-36/">PRB RTD 36 </a></li>
</ul>



<h3 class="wp-block-heading">Tools Needed</h3>



<ul class="wp-block-list">
<li>Driver Drill with #2 Phillips Bit</li>



<li>5/16&#8243; Nut Driver</li>



<li>1/4&#8243; Nut Driver</li>



<li>Pin Screwdriver</li>
</ul>



<h3 class="wp-block-heading">Steps</h3>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=t6ybIbKfkTo">0:00</a> &#8211; Introduction</p>



<p class="wp-block-paragraph"><strong>Replacing Cavity Probe</strong></p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=t6ybIbKfkTo&amp;t=20s">0:20</a> | Step 1: Remove the screws around the cover and see the cover aside. Open the unit and remove the racks and tray slides. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=t6ybIbKfkTo&amp;t=41s">0:41</a> | Step 2: Open the unit and locate the Cavity Probe on the left-hand side wall. Remove the two screws holding the probe in place. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=t6ybIbKfkTo&amp;t=52s">0:52</a> | Step 3: In the top of the unit, disconnect the Cavity Probe wires going to the control board, taking note of their location. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=t6ybIbKfkTo&amp;t=66s">1:06</a> | Step 4: Remove the old cavity probe and discard it. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=t6ybIbKfkTo&amp;t=73s">1:13</a> | Step 5: Guide new probe wires through the inside of the unit and grommet in the top side wall, up to the control board. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=t6ybIbKfkTo&amp;t=83s">1:23</a> | Step 6: Install the new Cavity Prove, mounting with the screws removed in Step 3. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=t6ybIbKfkTo&amp;t=93s">1:33</a> | Step 7: Connect the new probe wire to the control board. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=t6ybIbKfkTo&amp;t=99s">1:39</a> | Step 8: Restore power to the unit and test for operationality. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=t6ybIbKfkTo&amp;t=113s">1:53</a> | Step 9: Install the top cover and return the unit to service.</p>



<p class="wp-block-paragraph"><strong>Replacing Meat Probe Socket</strong></p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=t6ybIbKfkTo&amp;t=132s">2:12</a> | Step 1: Remove the screws around the cover and set the cover aside. Open the unit and remove racks and tray slides. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=t6ybIbKfkTo&amp;t=152s">2:32</a> | Step 2: Open the unit and locate the Meat Probe Socket and mounting bracket on the left-hand side wall. Remove the two screws holding the mounting bracket in place. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=t6ybIbKfkTo&amp;t=161s">2:41</a> | Step 3: In the top of the unit, disconnect the Probe Socket wires going to the control board, taking note of their location. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=t6ybIbKfkTo&amp;t=174s">2:54</a> | Step 4: Remove the mounting bracket and set it aside. Remove the old Probe Socket and discard it. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=t6ybIbKfkTo&amp;t=183s">3:03</a> | Step 5: Guide the new probe wires through the inside of the unit and grommet in the top side wall, up to the control board. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=t6ybIbKfkTo&amp;t=195s">3:15</a> | Step 6: Install the new Probe Socket in the mounting bracket and secure it with the screws removed in Step 3. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=t6ybIbKfkTo&amp;t=205s">3:25</a> | Step 7: Connect the new Probe Socket wires to the control board. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=t6ybIbKfkTo&amp;t=212s">3:32</a> | Step 8: Restore power to the unit and test for operationality. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=t6ybIbKfkTo&amp;t=225s">3:45</a> | Step 9: Install the top cover and return the unit to service.</p>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">In the food service industry, equipment breakdowns can be disruptive and costly. That&#8217;s why FWEParts is committed to providing step-by-step tutorials that make equipment repairs a breeze. If you&#8217;re facing issues replacing the Cavity Probe or Meat Probe Sockets, our service video offers a comprehensive guide to easily troubleshoot it using common tools. We&#8217;re here to support you every step of the way, so don&#8217;t hesitate to reach out to us at <a href="tel:1-615-805-3270">1-615-805-3270</a> or <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> if you have any questions or concerns. For a full list of video tutorials for FWE parts, check out this <a href="https://www.youtube.com/playlist?list=PLPyd_Uwy5f73F9oCC3NbIivtGe0p8fH4d">youtube playlist</a>.</p>



<p class="wp-block-paragraph"></p>
<p>The post <a href="https://www.hatcodirect.com/how-to-replace-the-cavity-probe-and-meat-probe-socket-on-fwe-lch-units/">How to Replace the Cavity Probe and Meat Probe Socket on FWE LCH Units</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>How to Replace the Elements in FWE LCH-G2 Units</title>
		<link>https://www.hatcodirect.com/how-to-replace-the-elements-in-fwe-lch-g2-units/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Mon, 14 Aug 2023 18:17:33 +0000</pubDate>
				<category><![CDATA[LCH-G2 Series]]></category>
		<category><![CDATA[Service & Part Replacement]]></category>
		<guid isPermaLink="false">https://www.hatcodirect.com/?p=21979</guid>

					<description><![CDATA[<p>A step-by-step tutorial for Replacing the Elements in LCH-G2 Units In the food service industry, equipment breakdowns can cause major disruptions to operations leading to lost revenue and frustrated customers. FWEParts step-by-step tutorials are here to provide easy-to-follow guides that will help you can get your equipment back into operation as quickly as possible. In [&#8230;]</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-replace-the-elements-in-fwe-lch-g2-units/">How to Replace the Elements in FWE LCH-G2 Units</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<h2 class="wp-block-heading">A step-by-step tutorial for Replacing the Elements in LCH-G2 Units</h2>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">In the food service industry, equipment breakdowns can cause major disruptions to operations leading to lost revenue and frustrated customers. FWEParts step-by-step tutorials are here to provide easy-to-follow guides that will help you can get your equipment back into operation as quickly as possible. In this article, we will introduce a service video that provides a step-by-step tutorial to easily Replace the Heating Elements used on FWE LCH-G2 units. If you are still experiencing issues with this, or any other part, please do not hesitate to reach out via phone at <a href="tel:16158053270">1-615-805-3270</a> or email at <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> if you have any questions or concerns</p>



<figure class="wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio"><div class="wp-block-embed__wrapper">
<iframe loading="lazy" title="FWEParts | LCH-G2 Series | How to Replace the Elements" width="1140" height="641" src="https://www.youtube.com/embed/mgYLJZcrNkw?feature=oembed" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
</div></figure>



<h2 class="wp-block-heading">Parts Covered in this Tutorial</h2>



<ul class="wp-block-list">
<li><a href="https://www.hatcodirect.com/part/el1500-240-lch/">EL1500-240-LCH</a></li>



<li><a href="https://www.hatcodirect.com/part/el1500-240/">EL1500-240</a></li>
</ul>



<h2 class="wp-block-heading">Tools Needed</h2>



<ul class="wp-block-list">
<li>Driver Drill with #2 Phillips Bit</li>



<li>5/16&#8243; Nut Driver</li>



<li>1/4&#8243; Nut Driver</li>



<li>11/16&#8243; Socket Wrench</li>
</ul>



<h2 class="wp-block-heading">Steps</h2>



<p class="wp-block-paragraph"><strong>Replacing Rear Element</strong></p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=mgYLJZcrNkw&amp;t=20s">0:20</a> | Step 1: Open the unit&#8217;s door and remove the racks, tray slides, drip pan, tray uprights, and bottom heat shield.</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=mgYLJZcrNkw&amp;t=42s">0:42</a> | Step 2: Remove the back tunnel to expose the rear element. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=mgYLJZcrNkw&amp;t=50s">0:50</a> | Step 3: Remove the outside back panel and locate the element terminals (2 inside terminals). </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=mgYLJZcrNkw&amp;t=58s">0:58</a> | Step 4: Disconnect the element wire connections. Remove nuts and washers and pull out the element from inside the unit. Discard the old element. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=mgYLJZcrNkw&amp;t=75s">1:15</a> | Step 5: Install the new element through the inside unit around the blower fan, locking it in place with nuts and washers removed in step 4. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=mgYLJZcrNkw&amp;t=86s">1:26</a> | Step 6: Reconnect the element connections and reinstall the back tunnel. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=mgYLJZcrNkw&amp;t=95s">1:35</a> | Step 7: Restore power and test unit for operationality. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=mgYLJZcrNkw&amp;t=102s">1:42</a> | Step 8: Reinstall the outside back panel, heat shield, tray uprights, tray slides, drip pan, and racks. Return unit to service.</p>



<p class="wp-block-paragraph"><strong>Replacing Bottom Element</strong></p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=mgYLJZcrNkw&amp;t=127s">2:07</a> | Step 1: Open the unit&#8217;s door and remove the racks, tray slides, and drip pan. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=mgYLJZcrNkw&amp;t=144s">2:24</a> | Step 2: Remove tray uprights and heat shield to expose the bottom element and element strap. Remove the strap and set aside. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=mgYLJZcrNkw&amp;t=158s">2:38</a> | Step 3: Remove the outside back panel and locate the 2 outside element terminals. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=mgYLJZcrNkw&amp;t=166s">2:46</a> | Step 4: Disconnect the element wire connections. Remove the nuts and washers and pull out the element from inside the unit. Discard the old element. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=mgYLJZcrNkw&amp;t=179s">2:59</a> | Step 5: Install the new element through the inside of the unit, remounting the strap over the element with the screws removed in Step 2. Lock the element in place with the nuts and washers removed in Step 4. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=mgYLJZcrNkw&amp;t=195s">3:15</a> | Step 6: Reconnect the element wire connections. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=mgYLJZcrNkw&amp;t=203s">3:23</a> | Step 7: Restore power and test the unit for operationality. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=mgYLJZcrNkw&amp;t=210s">3:30</a> | Step 8: Reinstall the outside back panel, heat shield, tray uprights, tray slides, drip pan, and racks. Return unit to service</p>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">In the food service industry, equipment breakdowns can be disruptive and costly. That&#8217;s why FWEParts is committed to providing step-by-step tutorials that make equipment repairs a breeze. If you&#8217;re facing issues replacing the elements used within FWE LCH-G2 units, our service video offers a comprehensive guide to easily troubleshoot it using common tools. We&#8217;re here to support you every step of the way, so don&#8217;t hesitate to reach out to us at <a href="tel:1-615-805-3270">1-615-805-3270</a> or <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> if you have any questions or concerns. For a full list of video tutorials for FWE parts, check out this <a href="https://www.youtube.com/playlist?list=PLPyd_Uwy5f73F9oCC3NbIivtGe0p8fH4d">youtube playlist</a>.</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-replace-the-elements-in-fwe-lch-g2-units/">How to Replace the Elements in FWE LCH-G2 Units</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>How to Replace the M-Wave Control Board (CNTRL BRD LCH PRGM 240) in LCH-G2 Units</title>
		<link>https://www.hatcodirect.com/how-to-replace-the-m-wave-control-board-cntrl-brd-lch-prgm-240-in-lch-g2-units/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Mon, 14 Aug 2023 18:16:06 +0000</pubDate>
				<category><![CDATA[LCH-G2 Series]]></category>
		<category><![CDATA[Service & Part Replacement]]></category>
		<guid isPermaLink="false">https://www.hatcodirect.com/?p=21977</guid>

					<description><![CDATA[<p>A step-by-step tutorial for Replacing the Elements within a Moisture-Temp Cabinet In the food service industry, equipment breakdowns can cause major disruptions to operations leading to lost revenue and frustrated customers. FWEParts step-by-step tutorials are here to provide easy-to-follow guides that will help you can get your equipment back into operation as quickly as possible. [&#8230;]</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-replace-the-m-wave-control-board-cntrl-brd-lch-prgm-240-in-lch-g2-units/">How to Replace the M-Wave Control Board (CNTRL BRD LCH PRGM 240) in LCH-G2 Units</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<h2 class="wp-block-heading">A step-by-step tutorial for Replacing the Elements within a Moisture-Temp Cabinet </h2>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">In the food service industry, equipment breakdowns can cause major disruptions to operations leading to lost revenue and frustrated customers. FWEParts step-by-step tutorials are here to provide easy-to-follow guides that will help you can get your equipment back into operation as quickly as possible. In this article, we will introduce a service video that provides a step-by-step tutorial to easily replace the hot air element and water element used within FWE Moisture-Temp units. If you are still experiencing issues with this, or any other part, please do not hesitate to reach out via phone at <a href="tel:16158053270">1-615-805-3270</a> or email at <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> if you have any questions or concerns.</p>



<figure class="wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio"><div class="wp-block-embed__wrapper">
<iframe loading="lazy" title="FWEParts | LCH-G2 Series | How to Replace the M-Wave Control Board (CNTRL BRD LCH PRGM 240)" width="1140" height="641" src="https://www.youtube.com/embed/MBJS5t3KBI8?feature=oembed" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
</div></figure>



<h2 class="wp-block-heading">Parts Covered in this Tutorial</h2>



<ul class="wp-block-list">
<li><a href="https://www.hatcodirect.com/part/cntrl-brd-lch-prgm/">CNTRL BRD LCH PRGRM 240</a></li>
</ul>



<h2 class="wp-block-heading">Tools Needed</h2>



<ul class="wp-block-list">
<li>Driver Drill with #2 Phillips Bit</li>



<li>5/16&#8243; Nut Driver</li>



<li>1/4&#8243; Nut Driver</li>



<li>Pin Screwdriver</li>
</ul>



<h2 class="wp-block-heading">Steps</h2>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=MBJS5t3KBI8&amp;t=0s">0:00</a> | Introduction</p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=MBJS5t3KBI8&amp;t=17s">0:17</a> | Step 1: Remove the screws around the top cover, then remove the cover and set aside. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=MBJS5t3KBI8&amp;t=27s">0:27</a> | Step 2: Locate the control board inside the top of the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=MBJS5t3KBI8&amp;t=1s">0:34</a> | Step 3: Disconnect all the wires attached to the control board, taking note of their locations. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=MBJS5t3KBI8&amp;t=53s">0:53</a> | Step 4: Locate and remove the 4 nuts that hold the control board in place. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=MBJS5t3KBI8&amp;t=66s">1:06</a> | Step 5: Remove the control board from the mounting screws. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=MBJS5t3KBI8&amp;t=72s">1:12</a> | Step 6: Install the new control board. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=MBJS5t3KBI8&amp;t=87s">1:27</a> | Step 7: Install the 4 nuts removed in Step 4 to secure the control board. Tighten so the button functions depress correctly, careful not to overtighten. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=MBJS5t3KBI8&amp;t=98s">1:38</a> | Step 8: Reconnect all the wires removed in Step 3 to the correct locations on the new board. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=MBJS5t3KBI8&amp;t=109s">1:49</a> | Step 9: Restore power and test the unit for operationality. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=MBJS5t3KBI8&amp;t=116s">1:56</a> | Step 10: Reinstall the top cover and fasten using the screw removed in Step 1. Return the unit to service.</p>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">In the food service industry, equipment breakdowns can be disruptive and costly. That&#8217;s why FWEParts is committed to providing step-by-step tutorials that make equipment repairs a breeze. If you&#8217;re facing issues replacing the hot air or water elements used within FWE Moisture Temp units, our service video offers a comprehensive guide to easily troubleshoot it using common tools. We&#8217;re here to support you every step of the way, so don&#8217;t hesitate to reach out to us at <a href="tel:1-615-805-3270">1-615-805-3270</a> or <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> if you have any questions or concerns. For a full list of video tutorials for FWE parts, check out this <a href="https://www.youtube.com/playlist?list=PLPyd_Uwy5f73F9oCC3NbIivtGe0p8fH4d">youtube playlist</a>.</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-replace-the-m-wave-control-board-cntrl-brd-lch-prgm-240-in-lch-g2-units/">How to Replace the M-Wave Control Board (CNTRL BRD LCH PRGM 240) in LCH-G2 Units</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>How to Change the Control Board Temperature Display and Control Lock Settings on FWE LCH Units</title>
		<link>https://www.hatcodirect.com/how-to-change-the-control-board-temperature-display-and-control-lock-settings-on-fwe-lch-units/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Wed, 09 Aug 2023 18:55:16 +0000</pubDate>
				<category><![CDATA[LCH Series]]></category>
		<category><![CDATA[LCH-G2 Series]]></category>
		<category><![CDATA[Service & Part Replacement]]></category>
		<category><![CDATA[Uncategorized]]></category>
		<guid isPermaLink="false">https://www.hatcodirect.com/?p=21983</guid>

					<description><![CDATA[<p>In the food service industry, equipment breakdowns can cause major disruptions to operations leading to lost revenue and frustrated customers. FWEParts step-by-step tutorials are here to provide easy-to-follow guides that will help you can get your equipment back into operation as quickly as possible. In this article, we will introduce a service video that provides [&#8230;]</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-change-the-control-board-temperature-display-and-control-lock-settings-on-fwe-lch-units/">How to Change the Control Board Temperature Display and Control Lock Settings on FWE LCH Units</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">In the food service industry, equipment breakdowns can cause major disruptions to operations leading to lost revenue and frustrated customers. FWEParts step-by-step tutorials are here to provide easy-to-follow guides that will help you can get your equipment back into operation as quickly as possible. In this article, we will introduce a service video that provides a step-by-step tutorial to easily change the control board temperature display and control lock settings on FWE LCH units. If you are still experiencing issues with this, or any other part, please do not hesitate to reach out via phone at <a href="tel:16158053270">1-615-805-3270</a> or email at <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> if you have any questions or concerns.</p>



<figure class="wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio"><div class="wp-block-embed__wrapper">
<iframe loading="lazy" title="FWEParts | LCH-G2 Series | How to Change the Control Board Temp. Display &amp; Control Lock Settings" width="1140" height="641" src="https://www.youtube.com/embed/lgB8n1GTmbU?feature=oembed" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
</div></figure>



<h3 class="wp-block-heading">Parts Covered in this Tutorial</h3>



<ul class="wp-block-list">
<li>LCH-G2 FWE Models</li>
</ul>



<h3 class="wp-block-heading">Tools Needed</h3>



<ul class="wp-block-list">
<li>None</li>
</ul>



<h3 class="wp-block-heading">Steps</h3>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=lgB8n1GTmbU">0:00 </a>&#8211; Introduction</p>



<p class="wp-block-paragraph"><strong>Changing Control to Display Fahrenheit or Celsius</strong></p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=lgB8n1GTmbU&amp;t=12s">0:12</a> | Step 1: Hold down the Start/Cancel button while powering on the unit. </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=lgB8n1GTmbU&amp;t=18s">0:18</a> | Step 2: Turn the dial clockwise to select Fahrenheit or counterclockwise to select Celsius </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=lgB8n1GTmbU&amp;t=24s">0:24</a> | Step 3: Once the correct setting is selected, press the Start/Cancel button to save the selection.</p>



<p class="wp-block-paragraph"><strong>Control Lock Function</strong></p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=lgB8n1GTmbU&amp;t=30s">0:30</a> | Step 1: From idle &#8220;&#8212;-&#8221; Press and hold the Start/Cancel button for 10 seconds. Control will display the text &#8220;Loc&#8221; for 2 seconds with a 1-second audible beep. (NOTE: While controls are locked, only idle (&#8212;-), Start/Cancel, and presets buttons are accessible.) </p>



<p class="wp-block-paragraph"><a href="https://www.youtube.com/watch?v=lgB8n1GTmbU&amp;t=69s">1:09</a> | Step 2: To unlock the controls, press and hold the Start/Cancel button for 10 seconds from idle &#8220;&#8212;-&#8220;. Control will display the text &#8220;Uloc&#8221; for 2 seconds with a 1-second audible beep.</p>



<hr class="wp-block-separator has-alpha-channel-opacity"/>



<p class="wp-block-paragraph">In the food service industry, equipment breakdowns can be disruptive and costly. That&#8217;s why FWEParts is committed to providing step-by-step tutorials that make equipment repairs a breeze. If you&#8217;re facing issues changing the control board temperature display, or control lock settings, our service video offers a comprehensive guide to easily troubleshoot it using common tools. We&#8217;re here to support you every step of the way, so don&#8217;t hesitate to reach out to us at <a href="tel:16158053270">1-615-805-3270</a> or <a href="mailto:service@hatcodirect.com">service@hatcodirect.com</a> if you have any questions or concerns. For a full list of video tutorials for FWE parts, check out this <a href="https://www.youtube.com/playlist?list=PLPyd_Uwy5f73F9oCC3NbIivtGe0p8fH4d">youtube playlist</a>.</p>
<p>The post <a href="https://www.hatcodirect.com/how-to-change-the-control-board-temperature-display-and-control-lock-settings-on-fwe-lch-units/">How to Change the Control Board Temperature Display and Control Lock Settings on FWE LCH Units</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Operation Instructions for LCH-G2 and LCH-SK-G2 Series Models</title>
		<link>https://www.hatcodirect.com/operation-instructions-for-lch-g2-and-lch-sk-g2-series-models/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Fri, 24 Feb 2023 21:59:54 +0000</pubDate>
				<category><![CDATA[LCH-G2 Series]]></category>
		<category><![CDATA[LCH-SK-G2 Series]]></category>
		<category><![CDATA[Operational Instruction]]></category>
		<category><![CDATA[Videos]]></category>
		<guid isPermaLink="false">https://www.hatcodirect.com/?p=21004</guid>

					<description><![CDATA[<p>The post <a href="https://www.hatcodirect.com/operation-instructions-for-lch-g2-and-lch-sk-g2-series-models/">Operation Instructions for LCH-G2 and LCH-SK-G2 Series Models</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio"><div class="wp-block-embed__wrapper">
<iframe loading="lazy" title="Operation Instructions for LCH-G2 and LCH-SK-G2 Models" width="1140" height="641" src="https://www.youtube.com/embed/CC_ORqc2riI?list=PLPyd_Uwy5f72nM9tqRdxGLeWzKsqoWTP5" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
</div></figure>
<p>The post <a href="https://www.hatcodirect.com/operation-instructions-for-lch-g2-and-lch-sk-g2-series-models/">Operation Instructions for LCH-G2 and LCH-SK-G2 Series Models</a> appeared first on <a href="https://www.hatcodirect.com">OEM Parts for Hatco Equipment | Hatco Trade Direct Parts</a>.</p>
]]></content:encoded>
					
		
		
			</item>
	</channel>
</rss>
